Ads by GelexAds

Compare prices with our comparison shopping engine and negotiate the best deal online.

Computers & Software

250 products
11 Pages Page: 
Narrow by Price Range:

Narrow by Operating System:


Narrow by Processor Manufacturer:


Narrow by Color:


Narrow by Flash:


Narrow by Networking Type:


Narrow by Networking Connection Type:


Narrow by Switching Protocol:


Narrow by Network Transport Protocol:


Narrow by Compatibility Requirements:


Narrow by System Type:


    Switch to grid view  
  Click to enlarge product image

Brownells Counter Displays - Oxpho Blue Creme Display

Let Oxpho-Blue's toughness and T-4's fast-coloring ability make sales $ for you. You get 12, 4 oz. bottles in a shipping case that folds up to make its own eye-catching counter display. The product sells itself! Cannot ship outside Continental United...  Read more 

from Brownells   
(IN Stock)
  Click to enlarge product image

Brownells Barrel/Receiver Dies - Savage Die

Clean and chase dinged or imperfect threads. Real lifesavers for any rebarreling job, especially good when installing any of our "no-lathe", pre- threaded barrels. Thanks to Walt Warren for his suggestion. Mfg: Brownells SPECS: High speed steel. Dies...  Read more 

from Brownells   
(IN Stock)
  Click to enlarge product image

Brownells Wire Gauge Carbon Dies - Die, 10-36, 20, 11

We supply our dies in Carbon steel whenever possible. Mfg: Brownells SPECS: Dies are 13/16" O.D. round unless otherwise marked in chart.  Read more 

from Brownells   
(IN Stock)
  Click to enlarge product image

Brownells 1" Thick Loose Muslin Wheels - 8" X 1" Wheel, 1" Arbor

Easy to handle, economical way to set up 1" face wheel. Arbor stitched only. Mfg: Brownells SPECS: 1" (2.5cm) thick; equals 4�, 20-ply wheels. Arbor: �" (12.7mm), 5/8" (15.9mm), �" (19.0mm), 7/8" (22.2mm), 1" (2.5cm). Wheel Diameter: 6" (15.2cm), 8"...  Read more 

from Brownells   
(IN Stock)
  Click to enlarge product image

Brownells 1" Thick Loose Muslin Wheels - 10" X 1" Wheel, 3/4" Arbor

Easy to handle, economical way to set up 1" face wheel. Arbor stitched only. Mfg: Brownells SPECS: 1" (2.5cm) thick; equals 4�, 20-ply wheels. Arbor: �" (12.7mm), 5/8" (15.9mm), �" (19.0mm), 7/8" (22.2mm), 1" (2.5cm). Wheel Diameter: 6" (15.2cm), 8"...  Read more 

from Brownells   
(IN Stock)
  Click to enlarge product image

Brownells Muslin Wheels - 6" Loose Muslin Wheel 1/2" Arbor

Spiral Stitched - used primarily for first cleaning operation on the gun with No. 140 Polish-O-Ray to knock off old blue, dirt and rust and bring the metal to a bright finish. Also used by some operators instead of Soft Felt wheels - being of a more...  Read more 

from Brownells   
(IN Stock)
  Click to enlarge product image

Brownells Muslin Wheels - 6" Stitched Muslin Wheel 1/2" Arbor

Spiral Stitched - used primarily for first cleaning operation on the gun with No. 140 Polish-O-Ray to knock off old blue, dirt and rust and bring the metal to a bright finish. Also used by some operators instead of Soft Felt wheels - being of a more...  Read more 

from Brownells   
(IN Stock)
  Click to enlarge product image

Brownells Sisal Wheels - 8" Sisal Wheel, 5/8" (15.9mm) Arbor

7 plys of prime woven jute with an outer muslin cover on each side provide a very aggressive surface for fast removal of rough metal, rust and similar jobs with coarser polishing grits. Finer grits produce an attractive "brushed" finish. Spiral...  Read more 

from Brownells   
(IN Stock)
  Click to enlarge product image

Brownells Multi-Vise - Multi-Vise, Handle W/Knobs

Don't adjust jobs to your vise; adjust your Multi-Vise to the job. Multi-Vise adjusts in every direction a job can take you…position it horizontally, vertically, and rotate it 360� in a horizontal plane. Multi-Vise adapts to nearly any job; drilling,...  Read more 

from Brownells   
(IN Stock)
  Click to enlarge product image

Brownells 1911 Lug Cutter - Handle & .186" Cutter

Hand operated, carbide cutter easily trims excess material from the bottom barrel lug when fitting custom or factory barrels to 1911 Autos. Cuts barrel lugs parallel, and with the correct height and radius, to help produce the best possible lockup. Use...  Read more 

from Brownells   
(IN Stock)
  Click to enlarge product image

Brownells Sight Insert Kit - White Sheet

When you need to install or replace a colored plastic front sight insert in a handgun, this kit has everything you need. Enough material for a total of 228 Sight Inserts. You also get files and complete, illustrated instructions. Available as...  Read more 

from Brownells   
(IN Stock)
  Click to enlarge product image

Brownells Magna-Tip Super Sets - 58 Bit Master Set Plus W/ #81 Handle

Every gunsmith knows no two screw slots are ever exactly the same. Because so many factories use outside vendors for screws, slot sizes can vary, even within the same model of gun. If you want to be professional about your work, you custom grind each...  Read more 

from Brownells   
(IN Stock)
  Click to enlarge product image

Brownells Magna-Tip Super Sets - 58 Bit Master Set Plus W/ Hollow Handle

Every gunsmith knows no two screw slots are ever exactly the same. Because so many factories use outside vendors for screws, slot sizes can vary, even within the same model of gun. If you want to be professional about your work, you custom grind each...  Read more 

from Brownells   
(IN Stock)
  Click to enlarge product image

Brownells Magna-Tip Thin-Bits - Bit #210-1, Sd=.210, Bt=.020

Eighteen incredibly thin bits to fit the extra-narrow screw slots often encountered in the gun shop. Take great care when using these bits. The blade MUST fill the slot from side-to-side and edge-to-edge or it will most certainly break on a firmly...  Read more 

from Brownells   
(IN Stock)
  Click to enlarge product image

Brownells Magna-Tip Bits - Bit #185-9, Sd=7/64" Allen

With Brownells MAGNA-TIP screwdriver, it is now possible for the gunsmith and firearms hobbyist to have a close fit in most any gun screw he will encounter - and darn near everything around the house and garage too.DESIGN OF BITSThe TRUE hollow-ground...  Read more 

from Brownells   
(IN Stock)
  Click to enlarge product image

Brownells Black Roll Pin Kit - Roll Pin Kit

With the increasing use of roll pins in guns, we've been looking for a good assortment of them in black steel finish to offer. Finally found it - with 850 pins in 8 diameters and various lengths (see below). Should take care of most gun needs! Great...  Read more 

from Brownells   
(IN Stock)
  Click to enlarge product image

Brownells La Salle "fatigue Proof" Steel Rods - 1/4" Fatigue Proof Steel Rods

Superior quality, high density; is very machineable and tough without brittleness, due to a higher ratio of manganese to carbon. Does not require heat treating like low density mild steel - perfect for spring guides, screws, firing pins, any parts that...  Read more 

from Brownells   
(IN Stock)
  Click to enlarge product image

Brownells Sight Base Screw Kit - Sight Base Screw Refil Pak, Weaver Oval, 6-48x3/16"

This Kit has been extremely popular with our customers for many years. The gunsmiths and dealers who do any type of sight work have found that they do not like to be without it. The slotted-head screws included in the kit cover at least 99% of all...  Read more 

from Brownells   
(IN Stock)
  Click to enlarge product image

Brownells Sight Base Screw Kit - Sight Base Screw Refil Pak, Weaver Oval, 8-40x1/2"

This Kit has been extremely popular with our customers for many years. The gunsmiths and dealers who do any type of sight work have found that they do not like to be without it. The slotted-head screws included in the kit cover at least 99% of all...  Read more 

from Brownells   
(IN Stock)
  Click to enlarge product image

Brownells Gunsmith Professional Punch Set - Pro Punch Set

For bench use or service kit. Contains 10 punches, one each of the four super quality starter and pin punches shown above, plus center punch and a special prick punch for staking sights, pins and the like. Attractively packaged in durable, pocketed,...  Read more 

from Brownells   
(IN Stock)
  Click to enlarge product image

Brownells No. 555 Black Polish - 555Black

"Good Old Five-Fifty-Five" as the boys call it. This is the "secret" that master polishers use to give that mirror finish to the gun after Polish-O-Ray 500. For the brightest possible finishes, we recommend hard felt, followed by loose muslin for each...  Read more 

from Brownells   
(IN Stock)
  Click to enlarge product image

Brownells Engine Turning Brush Set - E/T Brush Set

Easy-to-fit Heat Shrink Tubing or roll-on "O" Rings squeeze Engine Turning Brush bristles together so they don't spread out. Keeps those crisp, sharp, deep "swirls" that set a professional jeweling job apart from the rest. Adds a new dimension to your...  Read more 

from Brownells   
(IN Stock)
  Click to enlarge product image

Brownells Revolver Barrel/Frame Taps - L Frame Tap

Custom made to our specs to fit the oddball threads on S&W K, L and N, and Ruger GP-100 barrels/frames. Absolutely essential when rebarreling, whether you're installing factory replacement or custom bull barrels. Perfect for cleaning up dinged or...  Read more 

from Brownells   
(IN Stock)
  Click to enlarge product image

Brownells Revolver Range Rods - Rod Head For .38/357 Service

Lets you know instantly if a revolver barrel and cylinder are in perfect alignment and if cylinder crane or yoke has been sprung, thus throwing axis of each out of line with axis of barrel bore . . . for timing - "accuracy jobs" . . . locating cause of...  Read more 

from Brownells   
(IN Stock)
11 Pages Page: 
What are you shopping for?


Terms of Use | Privacy Policy | Contact Us | About Us | Site Map


© 2018 PriceQuest.com  All Rights Reserved.   Please send us your feedback on our site.

Powered by Bizrate